+998(90) 3462411
+998(90) 3462411

Packaging equipment with strapping tape

These manual tensioners are used for bonding polymeric strapping tape with a wire clamp (buckle) and with clamping devices (mites) - for fastening the ribbon with the metal bracket. The width of the tape, fastened with hand tensioners - 9-19 mm.

 

 

With this device, you can save effort in the process of packaging PP tapes.

 

 

How to use the device?

 

- Wrap around the load.

- Place the buckle in the tape.

- Take the tensioner in your right hand, squeeze the handles. Place the tape under the knife and under the heel of the clamp, then lower the handle.

- The other end of the tape pass through the knife and tension drum. While holding the tensioner with your left hand, move the handle back and forth with your right until you get the required tension.

- Squeeze the tensioner handles – the tape is cut. Slide the tensioner with the handles squeezed to the right. Harness complete. 

 

Related products

Answer any questions about the product, cost and timing

Clarify the availability of the necessary volumes in stock

Calculate the discount depending on the required volume